NEXAS Battery Tester NB300 12V Automotive Battery Analyzer Check Car Battery Health Starter Cranking Voltage Output Charging Diagnostic Battery Load Tester
Description
- BATTERY HEALTH TESTER: the 12V battery analyzer tests voltage, code crank amps (cranking capability) and aging extent of regular flooded (lead acid battery, SLA), AGM flat plate, AGM spiral and GEL batteries by CCA, BCI, CA, MCA,JIS, DIN, IEC, EN, SAE, GB rating system. Detect bad cells directly. It also supports ripple voltage test
- STARTER CHARGING SYSTEM TEST: the car battery checker tests the crank voltage, crank current and alternator output, analyzes the charging status and cranking status, indicating common fault of the vehicle starting and charging system
- SAFETY OPERATION: Reverse polarity protection, no emission of light, heat, sprak, nor discharge battery, the12 volt battery load tester keeps itself, operator and battery safe. The car battery tester is designed for 12 volt batteries on motorcycles, passenger cars, mini vans, light duty vehicles. A source above 18V DC will damage the tool
- FAST SCAN & ACCURATE RESULT: Quick and accurate test results display in just 3 seconds. Automatic temperature compensation, test batteries not full charged on and out of car
- DISPLAY AND LANGUAGE: The battery diagnostic analyzing tool comes with a backlit display. Test results, not only battery status, but also numerical results, telling you how good or bad the battery is, are clearly displayed. Support English, Spanish, French, Italian, German, Russian, Finland, Portuguese, Swedish, Polish etc
- ›See more product details
1, Multiple vehicle applications –motorcycles, passenger cars, mini vans, light duty vehicles with 12V battery; 2, Tests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel, etc; 3, Tests all battery rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB 4, Tests the batteries on the car directly- no need to remove the battery 5, Tests 12V charging system, advanced starter test 6, Quick starter analysis without disabling the ignition 7, Ripple voltage test for easy and intuitive check of faults 8, Directly test the battery with loss of electricity, full charge is not required before testing. 9, Easy to use with large backlight LCD display and menu-driven operation Battery Test Result 1) Good Battery : The battery is in good health, please be free to use! 2) Charge Battery: The battery is good but with low power. Please recharge it before using. 3) Replace: The battery is near to or already reached the end of its service life, replace it immediately, otherwise, potential hazard will be followed. 4) Bad Cell : The battery has internal damage, broken cell or short circuit, please replace it. 5) Charge, Retest: Unstable battery shall be recharged and retested to avoid error. If same test result appears after recharge and retest, the battery is regarded as damaged, please replace it. Specifications Screen: 126*64 LCD display Input voltage range: 8~18V Operating current: <100mA@12V (Typical) Power consumption: < 1.2W (Typical) Operating temperature: 32°F~122°F / 0°C~50°C Storage tempetature: -4°F~158°F / -20°C ~70°C @ RH60%
Reviews
S**N
Sent it back - either rubbish or far to complex to use. Either way not much use at all.
I sent it back.Not sure if I was expecting more than it offered.Not of much use and hard to use on your own.Very complex instructions.You need to know lots of different values about the battery and the test you want to do.Repeat reading all over the shop so not much use
M**H
Good little tester
Good little tester. Make sure you get a good connection otherwise you'll get inaccurate results with regards SOH of the battery.
A**R
Four Stars
It is in working condition useful to check of a battery
A**S
Four Stars
Very useful piece of equipment.
**L
Five Stars
Was very good and met my expectations
R**M
Good product
Great value item.
Common Questions
Trustpilot
4 days ago
2 weeks ago
